Bollard Pros surface mount plate 3″ SCH 40 Pipe Bollards is 36″ tall. Bollards is designed for quick surface mount attachment.
Features:
- Welded and ground low profile dome cap
- 3″ schedule 40 mild steel pipe
- 7 1/4″ round base plate 1/4″ thick with (4) 3/4″ holes for 5/8″ wedge anchors
- Includes (4) 5/8″ x 5″ wedge anchors
- Powder coated safety yellow (custom colors available)
- Made in the USA
- 30 lbs.
These heavy duty surface mounted bollards are ideal for the protection of storefronts, parking lots, garages, warehouse entrances, and many other locations with heavy vehicle or pedestrian activity.
4.5″ x 42″ Surface Mounted Plate Bollard w/ anchors
Bollard Pros surface mount plate 4″ SCH 40 Pipe Bollards is 42″ tall. Bollards is designed for quick surface mount attachment.
Features:
- Welded and ground low profile dome cap
- 4″ schedule 40 mild steel pipe
- 9″ round base plate 3/8″ thick with (4) 3/4″ holes for 5/8″ wedge anchors
- Includes (4) 5/8″ wedge anchors
- Powder coated safety yellow (custom colors available)
- Made in the USA
- 47 lbs.
These heavy duty surface mounted bollards are ideal for the protection of storefronts, parking lots, garages, warehouse entrances, and many other locations with heavy vehicle or pedestrian activity.
6.625″ x 48″ Surface Mounted Plate Bollard w/ anchors
Bollard Pros surface mount plate 6″ SCH 40 Pipe Bollards is 48″ tall. Bollards is designed for quick surface mount attachment.
Features:
- Welded and ground low profile dome cap
- 6″ schedule 40 mild steel pipe
- 10 1/2″ round base plate 1/2″ thick with (4) 7/8″ holes for 3/4″ wedge anchors
- Includes (4) 3/4″ wedge anchors
- Powder coated safety yellow (custom colors available)
- Made in the USA
- 92 lbs.
These heavy duty surface mounted bollards are ideal for the protection of storefronts, parking lots, garages, warehouse entrances, and many other locations with heavy vehicle or pedestrian activity.
Additional features for this model include:
- Type 304 stainless steel pipe bollard – brushed to a #4 finish.
- Welded and ground smooth, low profile dome cap.
- 10.5″ round x .5″ thick base plate with (6) 7/8″ holes for 3/4″ wedge anchors.
- Schedule 40 domestic pipe.
- The bollard picture with the sloped flat top is an optional style choice rather than the dome cap top.
- This bollard is welded on the top and bottom of the .5″ type 304 stainless steel base plate.
- Manufactured in the USA at our facility
- 80 lbs.
These heavy duty surface mounted bollard posts are ideal for the protection of storefronts, parking lots and garages, warehouse entrances, and many other locations with heavy vehicle or pedestrian activity. They are good for areas requiring higher levels of security on a permanent basis.
4″Surface Mount Removable Locking Bollard
Bollard Pros surface mount removable 4″ SCH 40 Pipe Bollard is 42″ tall. The Bollard features an easily removable base for quick access.
Features:
- 4″ schedule 40 domestic pipe with 3/8″ bottom plate that mates to the base plate
- Includes 4- 5/8″ Wedge anchors
- 4″ SCH 40 mild steel pipe
- Welded and ground smooth low profile dome cap
- The 3/8″ thick bottom plate has (4) 3/4″ holes for using 5/8″ diameter wedge anchors
- Bollard and plates are powder coated safety yellow (custom colors available)
- Optional puck lock also available
- Made in the USA
- 55 lbs.
Bollard Pros 4″ lockable bollards use an American puck style lock or a padlock sold separately. If multiple 4″ locking bollards are purchased, the locks will be keyed alike for ease and added convenience.
6″ Surface Mount Removable Locking Bollard
Bollard Pros surface mount removable 6” SCH 40 Pipe Bollard is 42″ tall. The Bollard features an easily removable base for quick access.
Features:
- 6″ schedule 40 domestic pipe with 1/2″ bottom plate that mates to the base plate
- 6″ SCH 40 mild steel pipe
- Welded and ground smooth low profile dome cap
- The 1/2″ thick bottom plate has (4) 7/8″ holes for using 3/4″ diameter wedge anchors
- Bollard and plates are powder coated safety yellow (custom colors available)
- Optional puck lock also available
- Made in the USA
- 115 lbs.
Bollard Pros 6″ lockable bollards use an American puck style lock or a padlock sold separately. If multiple 6″ locking bollards are purchased, the locks will be keyed alike for ease and added convenience.
SMRH bollards 42″ tall with a welded dome cap and hidden hardware. This bollard has a .5″ thick steel base plate with (3) .75″ holes for using .625″ diameter wedge anchors for anchoring to a concrete surface.
The hidden hardware bollard has a 1″ stainless steel bolt sticking out the bottom that screws into a 1″ stainless steel nut in the center of the base plate.
SMRH bollards look like an embedded bollard with hidden hardware. At the bollard base it has a set screw for locking the bollard to the base plate after the bollard is screwed to the base plate.
This bollard can also be fabricated out of stainless steel with a #4 finish.
This new style bollard is special order only at this time and will be in stock in the near future for immediate shipping.
45 lbs.
4.5″ x 42″ Embedded Removable Bollard
Bollard Pros embedded removable 4″ SCH 40 Pipe Bollard is 42″ tall. The bollard is designed to be easily removable with the look of a permanent bollard.
Bollard Features:
- 4″ SCH 40 domestic pipe equals 4 1/2″ OD
- Welded and ground low profile dome cap
- Bollard powder coated safety yellow (custom colors available)
- Made in the USA
- 60 lbs.
Sleeve Features:
- 12″ deep galvanized sleeve with 6″ drain extension.
- 1/4″ Stainless Steel top & lid
- Lid features pass through hole to bolt in closed position, and fits over post on bollard to padlock in open position
- Made in the USA
- 30 lbs.
Installation instructions: See PDF or call for additional information.
6 5/8″ x 48″ Embedded Removable Bollard
Bollard Pros embedded removable 6″ SCH 40 Pipe Bollard is 48″ tall. The bollard is designed to be easily removable with the look of a permanent bollard.
Bollard Features:
- 6″ SCH 40 domestic pipe equals 6 5/8″ OD
- Welded and ground low profile dome cap
- Bollard powder coated safety yellow (custom colors available)
- Made in the USA
- 115 lbs.
Sleeve Features:
- 18″ deep galvanized can with 6″ drain extension.
- 1/4″ Stainless Steel top & lid
- Lid features pass through hole to bolt in closed position, and fits over post on bollard to padlock in open position
- Made in the USA
- 50 lbs.
Installation instructions: See PDF or call for additional information.
8″ x 8 x 36″ Embedded Removable Square Wooden Bollard
Bollard Pros embedded removable 8″ square Bollard is 36″ tall above ground & 12″ below ground. The bollard is designed to be easily removable with the look of a permanent bollard.
Bollard Features:
- Pressure Treated Douglas Fir with CA-C coating.
- Eye bolt for attachment to sleeve
- Made in the USA
Sleeve Features:
- 12″ deep galvanized sleeve
- 1/8″ steel with hot dip galvanized finish
- Lid features pass through hole that fits over eye bolt on bollard to padlock in open position
- Made in the USA
Installation instructions:See PDF or call for additional information.
THIS IS A SPECIAL ORDER NON STOCKING BOLLARD, PLEASE CALL FOR AVAILABILITY AND SHIPPING QUOTE.
Bollard Pros embedded 6″ Stainless Steel Bollard is 42″ above ground and 24″ in ground.
Features:
- 6″ SCH 40 (304) Stainless Steel Pipe
- Welded and ground low profile dome cap
- 50″ of Bollard is grained to a #4 finish
- Call for custom sizes and pricing
- Made in the USA
3″ x 60″ Idealshield Pipe Sleeves
Idealshield domed top bollard sleeves provide optimal appearance protection for Bollard Pros bollards. All pipe sleeves are constructed with 1/8″ Nominal Thick Low-Density Polyethylene Thermoplastic (LDPE) to protect posts from environmental conditions, for both indoor and outdoor applications. They are effective in lower traffic areas to protect bollards and keep them visually unobtrusive.
Idealshield Sleeve Bollard Post Cover Features
Idealshield pipe sleeves are available in a variety of colors to suit nearly any application, including blue, yellow, red, green, white, orange, gray, brown and black. Other features include:
- 4″, 6″ or 8″ diameters with a .125-thick wall or .25″ for heavier security
- Cut to custom heights
- Installation tape
- Available with or without reflective tape for additional visibility
- Made of UV antistatic additives
All Idealshield post sleeves protect bollards for years, increasing their usefulness while keeping them visually suitable for any location.
Unfortunately, Idealshield pipe sleeves aren’t available for will call, but you can call us at 425-336-2711 for a shipping quote. You can also visit our Shipping Policy page for additional information.
Ideal Shield Bollard Covers
Ideal Shield bollard covers offer superior protection for posts of all sizes both indoor and outdoor. With these domed top bollards, youll enhance the visibility of your posts and reduce the amount of maintenance needed to keep them looking attractive for years to come.
Install Ideal Shield Post Sleeves in Minutes
With Ideal Shields patented install method its easy to add post sleeves in just a few minutes. Once you’ve determined the diameter and height needed, your Ideal Shield post guard should fit snugly over the existing bollard.
The first step is to apply the two strips of installation tape (included in order) to the bollard. Remove the adhesive backing from one strip and wrap it about 6″ down from the top of the bollard, being careful to leave a gap rather than connecting the strip end to end. Air will need to rush through the gap when the post cover is put on. Next remove the adhesive backing from the second strip and wrap it completely around the bollard about 6″-8″ from the bottom.
Finally, take your Ideal Shield bollard cover and slip it over the post. It should smoothly glide over the post and remain firmly in place.
Ideal Shield Post Guard Materials and Finishes
Ideal Shield uses durable 1/8″ thick low-density polyethylene thermoplastic to construct their post sleeves. They come in a variety of diameters and can be cut to fit the exact height of existing bollards.
You can choose from a wide selection of colors to match the surrounding environment or to ensure the best visibility. Ideal Shield post guards are available with or without reflective tape for even better visibility at all hours of the day.
All ideal shield post sleeves found at Bollard Pros are proudly manufactured in the USA.
Ideal Shield features:
- 1/8″ nominal thick low-density polyethylene thermoplastic (LDPE).
- Available diameters: 4″ 6″ and 8″ with a .125″ thick thin wall. All sizes plus 3″ and 5″ covers are available in .25″ thick wall for heavy duty cover applications.
- Can be cut to custom heights.
- Installation tape included.
- Available colors: yellow, red, blue, white, green, gray, black, brown, and orange.
- Available with or without reflective tape.
- Made with UV antistatic additives.
- Great for lower traffic areas.
*THIS ITEM NOT AVAILABLE FOR WILL CALL, PLEASE CALL FOR SHIPPING QUOTE.